Welding Pump Fluid Cooler 115/230 VAC Motor & 115VAC Auxiliary Cooling Motor

******THIS WILL WORK ON THE "Miller Coolmate 4"
This welding Pump Kit Includes;

(1) Fluid-O-Tech PUMP

Model, APEX# PB0351TNANN4940

125 GPH and 250 PSI

(1) Pump to Motor Clamp, APEX# 1113

(1) FF-2RTE4 Auxiliary cooling motor, used to replace the dual shaft Motors.

This motor is 115 VAC and has wire leads

Notes of the fan motor which is 115 vac.

*Should be wired in with the motor so when the motor runs, the fan also runs.

*Verify with a volt meter, that you have 115vac going to fan before connecting to the fan motor.

If motor is 115 vac then wire in with motor and run the fan when the motor runs.

Position fan is same position and fan that was connected to the dual shaft motor.

***IF YOU NEED A 230 FAN MOTOR ......Please see our eBay item# 156613873646

(1) MOTOR, APEX# 6079

1/3 HP, DUAL VOLTAGE, 100-120/200-240V 60/50HZ, 6.4-6.3/3.0-3.1 A

1 PHASE

1725/1425 RPM

CONTINUOUS DUTY

NO CORD

48 FRAME

RESILIENT BASE

THERMALLY PROTECTED

US MOTORS

Shaft: 5/8" Special-slot-for Procon Pumps.

Protector: Automatic

(2) 6AYW7, 3/8" NPT Male x 1/4" NPT Female adapters

(2) 46M486, 1/4" NPT Male x 1/8" NPT Female

(1) APEX# 1113, Stainless steel pump to motor clamp

The pump is a rotary vane Fluid-O-Tech brass coolant pump.

Direct replacement for;

Weldcraft 5515

Bernard 5515 & 1144

Dynaflux P1100, ESAB 951347

CM Ind 680-30-067

Best Welds BE1100

Abicor-Binzel BWC-0002

Tweco 9-6164

Miller 10597, 255480, 197631, 177246, 174042

Tweco water coolers.

Water Cooler Pump, 5515 / P1100 vane type with built in coolant filter strainer.

Fits the following:

* Anchor Brand for 2500SS, 3500SS, 6500SS
*
* Bernard, ITW Weldcraft for 2500ss, 3500ss, 6500SS, V35
*
* Binzel for BWC-002
*
* ESAB for WC-8C part #951347
*
* Sentry 2500SS, 3500SS, 6500SS
*
* Miller for Miller Coolmate 3, 3.5, 4
*
* Dynaflux P1100 for PCIIV, R1100V, R1200V, VH1000V
*

Procon Water Cooler Pump, vane type, for Anchor, Bernard, Best Welds, Binzel, Miller, ITW, Weldcraft & Dynaflux systems!

NEW

INCLUDES NEW CLAMP

15 TO 125 Gallons Per Hour

built in, adjustable pressure relief valve.

Adjustable relief valve, factory set at 250.

The fittings are both FEMALE PIPE and are the 3/8" Pipe Thread size.