R600a, Industrial System Sealer with UV Leak Detection Dye Charge, 3 oz Can R600

R600a, Industrial System Sealer with UV Leak Detection Dye Charge, 3 oz Can R600

Regular price $39.00 Sale

(1) R600a, Industrial System Sealer with UV Leak Detection Dye Charge, 3 oz Can R600

**Always charge in the "INVERTED" position!

* We are a UPS Certified Hazardous Materials Shipper, and this item will ship legally with all required information.
 
This can requires a K28 Can Taper.

If you need a K28 Can taper, please go to the "Can Tapers" category and search K28.

There are several options available to choose from.

  • R600a, Industrial System Sealer with UV Leak Detection Dye Charge, 3 oz Can 

  • For R600a Refrigeration Systems

  • 3 oz, Aerosol Can

**Always charge in the "INVERTED" position!

* We are a UPS Certified Hazardous Materials Shipper, and this item will ship legally with all required information.
 
This can requires a K28 Can Taper.

If you need a K28 Can taper, please go to the "Can Tapers" category and search K28.

There are several options available to choose from.

  • Aerosol
  • Finds and seals leaks in ac systems

  • Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • System Sealer for R600 systems with the UV Leak Detector uses a precisely selected, fluorescent yellow dye that is highly visible.

  • While the dye is highly visible, and in most cases, able to be seen with the naked eye, the use of a blacklight as well as UV glasses does make it much more visible.

  • Before replacing expensive parts and labor, try the R600 System Sealer with UV Leak Detection Dye.

  • Works on most refrigeration systems.

  • Applications: R600 refrigeration systems, coolers, freezers, dehumidifiers, and a/c units.

  • For best results, use R600 Moisture Remover BEFORE using the System Sealer with UV Dye
  • to remove any moisture in your system. 

  • Moisture is corrosive and no one wants that in their refrigeration system!
  • DO NOT use in ammonia systems

  • DO NOT use in CO2 systems

  • DO NOT use in R410a systems- Pressure is too high and will explode the can

  • Gas propelled

  • Installs the same way as refrigerant

  • Cannot be added to a fully charged system