R470a New 11 lb, Refrigerant EPA Approved, Includes STOP LEAK DIY Instructions

Regular price $534.39 Sale

Gregoriou Brothers Refrigeration Since 1979

Frosty-Freeze

R470a New 11 lb, Refrigerant EPA Approved, Includes STOP LEAK DIY
Instructions

(1) 11 Lbs. R470a New Style Refrigerant

R470a is a EPA Approved Drop-In Replacement for the older style refrigerant.

(1) Top-Mount, Screw-On, Check and Charge It Gauge, Long Neck Style.

Hose connection is 1/4' male flare and the tank has a on/off valve.

(1) 36" Charging Hose

(1) CPS Products Part# AD87, Mini-Split systems Low-Side 5/16" service valve adapter.

*This screws onto the low-side and you connect the hose with the valve core depressor end to the AD87.

(1) Instructions for charging a residential AC system.

(1) Pocket Thermometer with a 1" dial and a range of 0 to 220 F.

*This is for checking discharge & return air temperatures and can be used to check suction line temperature.

(1) R470a Unit Sticker showing the NEW EPA APPROVED refrigerant

(1) Envirosafe ProSealXL4 Injector, System Sealer, LEAK STOP, good for A/C Systems 1.5 ton to 5 ton.

Most residential or Mini-Split Systems are 1.5 to 3 ton so this should be perfect for most users!

Enviro-Safe ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.

ProSeal XL4 Inject is compatible with all refrigerants including R470a and the older style refrigerant.

This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

Enviro-Safe has been producing and packaging sealants for over 17 years.

Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.

(1) 11 lb. Factory Sealed R470a with ProSealXL4 System Sealer Leak Stop Injector which is a drop-in replacement for the older style refrigerant.

**Includes Proseal XL4 System Sealer Stop Leak injector.

ProSeal XL4 Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints

Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications

One application will normally repair a leak in systems up from 1.5 to 5 tons.

If the a/c system that will not hold a vacuum, you need to use the Prodry XL4.

The reason for the vacuum or the use of Prodry XL4 is that it will eliminate moisture in the system.

Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system!

Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.

If there is still Proseal XL4 in the system it will reseal the schrader.

** SPECIAL NOTE: IF YOU HAVE ANY QUESTIONS ABOUT OUR LISTINGS, PLEASE FEEL FREE TO USE OUR EBAY COMMUNITIES MESSAGE SYSTEM AND WE WILL ANSWER YOUR QUESTION IN A TIMELY MANNER AND TO THE BEST OF OUR ABILITY.

R470a is a New Style, Environmentally Friendly, AC Refrigerant, R470a.

This listing is for a 11 Lbs., Factory Sealed Tank of R470a with ProSealXL4 System Sealer Leak Stop in-line injector!

Factory Sealed and Virgin Fresh!!

On January 1, 2022, the U.S. officially started its phase down of old Refrigerant.

Beginning this year, 2023, the production of OLD Refrigerants will be reduced by 10%, while a steeper cut comes in 2024, when production must be reduced to 60% of the baseline established by the Environmental Protection Agency.

On January 23rd 2023, our eBay community began to remove all of the older style Refrigerant from the site and we applaud this move.

We are happy to be able to offer a new style Refrigerant, R470a which is a awesome drop-in replacement for the older style Refrigerant.

R470a is a New HFO and is Environment friendly !

R470a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for the older style ac coolant.

R470a has an ASHRAE designation of R470A and is now available in the United States.

This revolutionary Refrigerant is the only retrofit replacement for the older style Refrigerant in existing systems.

R470a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for the older style Refrigerant.

R470a has an ASHRAE designation of R470A and is now available in the United States.

This revolutionary Refrigerant is the only retrofit replacement for the older style Refrigerant in existing systems.

R470a (HFO) 11 lbs. with ProSealXL4 System Sealer Stop Leak injector.

Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils.

Factory Sealed and virgin fresh!!

You will be receiving a EPA Approved Equipment sticker to place on your unit showing the unit has been converted to the new environmentally friendly Refrigerant R470a.

A1-ASHRAE Certified

EPA SNAP Approved

Can R470a be added to systems containing the older style Refrigerant without materially affecting the performance of the whole system?

Yes!, However, first and foremost, the EPA does not condone, recommend or approve of mixing any Refrigerant.

*Mixing of Refrigerant is allowed in other countries however!

However, R470a does not form an azeotropic mixture with the older style Refrigerant.

Therefore, if a technician inadvertently or unknowingly adds R470a to a system containing the older style Refrigerant the system will not generate any higher pressures and will operate as normal without any harm to system components.

*True Drop-In Replacement for the older style Refrigerant

*No Oil Changes

*No System Changes Required

*Made in the USA

The only refrigerant for all the older style Refrigerant applications!

R470a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for the older style Refrigerant.

R470a has an ASHRAE designation of R470A and is now available in the United States.

This revolutionary Refrigerant is the only retrofit replacement for the older style Refrigerant used in existing AC systems.

R470A is EPA SNAP approved and A1 ASHRAE certified as non-flammable and non-toxic.

The Refrigerant does not require design modifications or component changes.

R470a can operate with existing polyol ester (POE) oils present in the older style Refrigerant systems.

R470a is an blend, which is the environmentally friendly alternative to the commonly used blend in other Refrigerants.

Using R470a as a replacement is easy.

Just use the same tools, test instruments, and recovery machines as you use with the older style Refrigerant system.

R470A can accommodate state and federal legislation as they phase out high-GWP Refrigerant, such as the older style Refrigerant with a 2088 GWP.

R470A is formulated to be trouble-free and works with all the older style Refrigerant in compressors, system components and POE oils.

R470a has similar properties to the older style Refrigerant, including discharge pressure, discharge temperature, energy efficiency, and cooling capacity.

R470a adds up to an ideal replacement for the older style Refrigerant.

Clearly label the system to show it contains R470A.

1) Ensure the right equipment is available (e.g., recovery unit and cylinders, container for recovered lubricant, vacuum pump, weighing scales, replacement drier, etc.)

2) Record baseline data to establish the normal operating conditions for the equipment

3) Check the manufacturer’s specifications for the unit to find the recommended the older style Refrigerant charge in order to determine the amount of R470A to add.

4) Replace the filter/drier if moisture is suspected in the system.

This is not necessary on a sealed system.

5) Having evacuated the system, liquid charge the unit with R470A up to 90% of the original charge amount of the older style Refrigerant and then compare to baseline data.

6) Switch on the unit and compare the baseline data, monitor sight glasses, suction line pressure and temperature, and discharge temperature; add additional R470A up to the recommended the older style refrigerant system charge amount as needed.

7) Where a thermostatic expansion valve (TXV) is present, and for optimum performance, make adjustments to attain the sweet spot.

This is not necessary for residential systems.

8) Check system thoroughly for leaks; and repair as needed.

9) Clearly label the system to show it contains R470A.

You will receive a label with the refrigerant.

Switch on the unit and compare the baseline data, monitor sight glasses, suction line pressure and temperature, and discharge temperature; add additional R470A up to the recommended the older style ac coolant system charge amount as needed.

You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped.

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you.

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

(1) 11 Lbs. R470a New Style Refrigerant R470a is a EPA Approved Drop-In Replacement for the older style refrigerant. (1) Top-Mount, Screw-On, Check and Charge It Gauge, Long Neck Style. Hose connection is 1/4' male flare and the tank has a on/off valve. (1) 36" Charging Hose (1) CPS Products Part# AD87, Mini-Split systems Low-Side 5/16" service valve adapter. *This screws onto the low-side and you connect the hose with the valve core depressor end to the AD87. (1) Instructions for charging a residential AC system. (1) Pocket Thermometer with a 1" dial and a range of 0 to 220 F. *This is for checking discharge & return air temperatures and can be used to check suction line temperature. (1) R470a Unit Sticker showing the NEW EPA APPROVED refrigerant (1) Envirosafe ProSealXL4 Injector, System Sealer, LEAK STOP, good for A/C Systems 1.5 ton to 5 ton. Most residential or Mini-Split Systems are 1.5 to 3 ton so this should be perfect for most users! Enviro-Safe ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants including R470a and the older style refrigerant. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. (1) 11 lb. Factory Sealed R470a with ProSealXL4 System Sealer Leak Stop Injector which is a drop-in replacement for the older style refrigerant. **Includes Proseal XL4 System Sealer Stop Leak injector. ---ProSeal XL4 Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints --- ---Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications --- ---One application will normally repair a leak in systems up from 1.5 to 5 tons. --- ---If the a/c system that will not hold a vacuum, you need to use the Prodry XL4. --- ---The reason for the vacuum or the use of Prodry XL4 is that it will eliminate moisture in the system. --- ---Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system! --- ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. --- ---If there is still Proseal XL4 in the system it will reseal the schrader. ** SPECIAL NOTE: IF YOU HAVE ANY QUESTIONS ABOUT OUR LISTINGS, PLEASE FEEL FREE TO USE OUR EBAY COMMUNITIES MESSAGE SYSTEM AND WE WILL ANSWER YOUR QUESTION IN A TIMELY MANNER AND TO THE BEST OF OUR ABILITY. R470a is a New Style, Environmentally Friendly, AC Refrigerant, R470a. This listing is for a 11 Lbs., Factory Sealed Tank of R470a with ProSealXL4 System Sealer Leak Stop in-line injector! Factory Sealed and Virgin Fresh!! On January 1, 2022, the U.S. officially started its phase down of old Refrigerant. Beginning this year, 2023, the production of OLD Refrigerants will be reduced by 10%, while a steeper cut comes in 2024, when production must be reduced to 60% of the baseline established by the Environmental Protection Agency. On January 23rd 2023, our eBay community began to remove all of the older style Refrigerant from the site and we applaud this move. We are happy to be able to offer a new style Refrigerant, R470a which is a awesome drop-in replacement for the older style Refrigerant. R470a is a New HFO and is Environment friendly ! R470a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for the older style ac coolant. R470a has an ASHRAE designation of R470A and is now available in the United States. This revolutionary Refrigerant is the only retrofit replacement for the older style Refrigerant in existing systems. R470a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for the older style Refrigerant. R470a has an ASHRAE designation of R470A and is now available in the United States. This revolutionary Refrigerant is the only retrofit replacement for the older style Refrigerant in existing systems. R470a (HFO) 11 lbs. with ProSealXL4 System Sealer Stop Leak injector. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils. --- Factory Sealed and virgin fresh!! You will be receiving a EPA Approved Equipment sticker to place on your unit showing the unit has been converted to the new environmentally friendly Refrigerant R470a. A1-ASHRAE Certified EPA SNAP Approved Can R470a be added to systems containing the older style Refrigerant without materially affecting the performance of the whole system? Yes!, However, first and foremost, the EPA does not condone, recommend or approve of mixing any Refrigerant. *Mixing of Refrigerant is allowed in other countries however! However, R470a does not form an azeotropic mixture with the older style Refrigerant. Therefore, if a technician inadvertently or unknowingly adds R470a to a system containing the older style Refrigerant the system will not generate any higher pressures and will operate as normal without any harm to system components. *True Drop-In Replacement for the older style Refrigerant *No Oil Changes *No System Changes Required *Made in the USA The only refrigerant for all the older style Refrigerant applications! R470a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for the older style Refrigerant. R470a has an ASHRAE designation of R470A and is now available in the United States. This revolutionary Refrigerant is the only retrofit replacement for the older style Refrigerant used in existing AC systems. R470A is EPA SNAP approved and A1 ASHRAE certified as non-flammable and non-toxic. The Refrigerant does not require design modifications or component changes. R470a can operate with existing polyol ester (POE) oils present in the older style Refrigerant systems. R470a is an blend, which is the environmentally friendly alternative to the commonly used blend in other Refrigerants. Using R470a as a replacement is easy. Just use the same tools, test instruments, and recovery machines as you use with the older style Refrigerant system. R470A can accommodate state and federal legislation as they phase out high-GWP Refrigerant, such as the older style Refrigerant with a 2088 GWP. R470A is formulated to be trouble-free and works with all the older style Refrigerant in compressors, system components and POE oils. R470a has similar properties to the older style Refrigerant, including discharge pressure, discharge temperature, energy efficiency, and cooling capacity. R470a adds up to an ideal replacement for the older style Refrigerant. Clearly label the system to show it contains R470A. 1) Ensure the right equipment is available (e.g., recovery unit and cylinders, container for recovered lubricant, vacuum pump, weighing scales, replacement drier, etc.) 2) Record baseline data to establish the normal operating conditions for the equipment 3) Check the manufacturer’s specifications for the unit to find the recommended the older style Refrigerant charge in order to determine the amount of R470A to add. 4) Replace the filter/drier if moisture is suspected in the system. This is not necessary on a sealed system. 5) Having evacuated the system, liquid charge the unit with R470A up to 90% of the original charge amount of the older style Refrigerant and then compare to baseline data. 6) Switch on the unit and compare the baseline data, monitor sight glasses, suction line pressure and temperature, and discharge temperature; add additional R470A up to the recommended the older style refrigerant system charge amount as needed. 7) Where a thermostatic expansion valve (TXV) is present, and for optimum performance, make adjustments to attain the sweet spot. This is not necessary for residential systems. 8) Check system thoroughly for leaks; and repair as needed. 9) Clearly label the system to show it contains R470A. You will receive a label with the refrigerant. Switch on the unit and compare the baseline data, monitor sight glasses, suction line pressure and temperature, and discharge temperature; add additional R470A up to the recommended the older style ac coolant system charge amount as needed.