R449a, R-449a Refrigerant, 20 oz., Replacement for R402A, R22, R408A, R502 & 502
Regular price
$159.95
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R449a, R-449a Refrigerant, 20 oz., Replacement for R402A, R22,
R408A, R502 & 502
R408A, R502 & 502
R449a
R-449a Refrigerant
20 oz.
Replacement for R402A, R22, R408A, R502 & 502
(1) 20 oz. R449a, Refrigerant Can with a CGA600 Top Fitting
(1) CGA600 Top-Mount, Screw-On can taper with a 1/4" hose connection.
Opteon™ XP40 (R-449A) is a low global warming potential (GWP) hydrofluoro-olefin (HFO)-based refrigerant developed as a direct replacement for HCFC-22 (R-22) and R-404A/R-507 in positive displacement, direct expansion, low- and medium temperature commercial and industrial applications.
Opteon™ XP40 can also be used as a replacement for “service” blends, such as Freon™ HP80 (R-402A) and Freon™ 408A.
Because R-402A and R-408A contain a significant percentage of R-22, these blends are subject to the same availability and cost constraints impacting pure R-22, which is being phased out under the Montreal Protocol.
R-402A and R-408A were designed and used as replacements for R-502 in low- and medium-temperature refrigeration systems in the early 1990s.
Most systems operating on R-402A and R-408A today are likely to be quite old, and system replacement with new equipment should always be considered as a first step.
Opteon™ XP40 is a HFC/HFO blend of HFC-32/HFC-125/ HFC-134a/HFO-1234yf (24.3/24.7/25.7/25.3 wt%) with an ANSI/ASHRAE Standard 34 refrigerant designation of R-449A.
It is commercially available around the world for both retrofit of existing (R-22, R-402A, R-408A, R-404A, R-507) equipment, as well as a suitable option for new equipment.
Opteon™ XP40 offers the best overall balance of performance, cost, safety, and sustainability as a class A1 refrigerant with a GWP of 1282 and zero ozone depletion potential (ODP).
Using these retrofit guidelines, existing R-402A and R-408A direct expansion refrigeration systems can be converted to operate using Opteon™ XP40, allowing the equipment to continue to function safely and efficiently with a greatly reduced environmental impact.
Important Safety Information Like all Freon™ and Opteon™ refrigerants, Opteon™ XP40 is safe to use when handled properly.
However, any refrigerant can cause injury or even death when mishandled.
Please review the following guidelines and consult the product Safety Data Sheet (SDS), including proper personal protective equipment recommendations, before using any refrigerant.
At a minimum, appropriate hand (gloves) and eye (safety glasses) protection should be used. •
Do not work in high concentrations of refrigerant vapors.
Always maintain adequate ventilation in the work area.
Do not breathe vapors.
Do not breathe lubricant mists from leaking systems.
Ventilate the area well after any leak before attempting to repair equipment. •
Do not use handheld leak detectors to check for breathable air in enclosed working spaces.
These detectors are not designed to determine if the air is safe to breathe.
Use oxygen monitors to ensure adequate oxygen is available to sustain life. •
Do not use flames or halide torches to search for leaks.
Open flames (e.g., halide or brazing torches) in the presence of any fluorocarbon refrigerant can decompose the refrigerant, forming hazardous acidic compounds.
Halide torches are not effective as leak detectors for HFO or HFC refrigerants, as they only detect the presence of chlorine in the refrigerant.
Chlorine is not present in Opteon™ XP40, and, consequently, these detectors will not detect the presence of this refrigerant.
Use an electronic leak detector specifically designed for the refrigerants you are using.
If you detect a visible change in the size or color of a flame when using brazing torches to repair equipment, stop work immediately and leave the area.
Ventilate the work area well, and stop any refrigerant leaks before resuming work.
These flame effects may be an indication of very high refrigerant concentrations, and continuing to work without adequate ventilation may result in injury or death
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
R449a R-449a Refrigerant 20 oz. Replacement for R402A, R22, R408A, R502 & 502 (1) 20 oz. R449a, Refrigerant Can with a CGA600 Top Fitting (1) CGA600 Top-Mount, Screw-On can taper with a 1/4" hose connection. Opteon™ XP40 (R-449A) is a low global warming potential (GWP) hydrofluoro-olefin (HFO)-based refrigerant developed as a direct replacement for HCFC-22 (R-22) and R-404A/R-507 in positive displacement, direct expansion, low- and medium temperature commercial and industrial applications. Opteon™ XP40 can also be used as a replacement for “service” blends, such as Freon™ HP80 (R-402A) and Freon™ 408A. Because R-402A and R-408A contain a significant percentage of R-22, these blends are subject to the same availability and cost constraints impacting pure R-22, which is being phased out under the Montreal Protocol. R-402A and R-408A were designed and used as replacements for R-502 in low- and medium-temperature refrigeration systems in the early 1990s. Most systems operating on R-402A and R-408A today are likely to be quite old, and system replacement with new equipment should always be considered as a first step. Opteon™ XP40 is a HFC/HFO blend of HFC-32/HFC-125/ HFC-134a/HFO-1234yf (24.3/24.7/25.7/25.3 wt%) with an ANSI/ASHRAE Standard 34 refrigerant designation of R-449A. It is commercially available around the world for both retrofit of existing (R-22, R-402A, R-408A, R-404A, R-507) equipment, as well as a suitable option for new equipment. Opteon™ XP40 offers the best overall balance of performance, cost, safety, and sustainability as a class A1 refrigerant with a GWP of 1282 and zero ozone depletion potential (ODP). Using these retrofit guidelines, existing R-402A and R-408A direct expansion refrigeration systems can be converted to operate using Opteon™ XP40, allowing the equipment to continue to function safely and efficiently with a greatly reduced environmental impact. Important Safety Information Like all Freon™ and Opteon™ refrigerants, Opteon™ XP40 is safe to use when handled properly. However, any refrigerant can cause injury or even death when mishandled. Please review the following guidelines and consult the product Safety Data Sheet (SDS), including proper personal protective equipment recommendations, before using any refrigerant. At a minimum, appropriate hand (gloves) and eye (safety glasses) protection should be used. • Do not work in high concentrations of refrigerant vapors. Always maintain adequate ventilation in the work area. Do not breathe vapors. Do not breathe lubricant mists from leaking systems. Ventilate the area well after any leak before attempting to repair equipment. • Do not use handheld leak detectors to check for breathable air in enclosed working spaces. These detectors are not designed to determine if the air is safe to breathe. Use oxygen monitors to ensure adequate oxygen is available to sustain life. • Do not use flames or halide torches to search for leaks. Open flames (e.g., halide or brazing torches) in the presence of any fluorocarbon refrigerant can decompose the refrigerant, forming hazardous acidic compounds. Halide torches are not effective as leak detectors for HFO or HFC refrigerants, as they only detect the presence of chlorine in the refrigerant. Chlorine is not present in Opteon™ XP40, and, consequently, these detectors will not detect the presence of this refrigerant. Use an electronic leak detector specifically designed for the refrigerants you are using. If you detect a visible change in the size or color of a flame when using brazing torches to repair equipment, stop work immediately and leave the area. Ventilate the work area well, and stop any refrigerant leaks before resuming work. These flame effects may be an indication of very high refrigerant concentrations, and continuing to work without adequate ventilation may result in injury or death
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R449a, R-449a Refrigerant, 20 oz., Replacement for R402A, R22,
R408A, R502 & 502
R408A, R502 & 502
R449a
R-449a Refrigerant
20 oz.
Replacement for R402A, R22, R408A, R502 & 502
(1) 20 oz. R449a, Refrigerant Can with a CGA600 Top Fitting
(1) CGA600 Top-Mount, Screw-On can taper with a 1/4" hose connection.
Opteon™ XP40 (R-449A) is a low global warming potential (GWP) hydrofluoro-olefin (HFO)-based refrigerant developed as a direct replacement for HCFC-22 (R-22) and R-404A/R-507 in positive displacement, direct expansion, low- and medium temperature commercial and industrial applications.
Opteon™ XP40 can also be used as a replacement for “service” blends, such as Freon™ HP80 (R-402A) and Freon™ 408A.
Because R-402A and R-408A contain a significant percentage of R-22, these blends are subject to the same availability and cost constraints impacting pure R-22, which is being phased out under the Montreal Protocol.
R-402A and R-408A were designed and used as replacements for R-502 in low- and medium-temperature refrigeration systems in the early 1990s.
Most systems operating on R-402A and R-408A today are likely to be quite old, and system replacement with new equipment should always be considered as a first step.
Opteon™ XP40 is a HFC/HFO blend of HFC-32/HFC-125/ HFC-134a/HFO-1234yf (24.3/24.7/25.7/25.3 wt%) with an ANSI/ASHRAE Standard 34 refrigerant designation of R-449A.
It is commercially available around the world for both retrofit of existing (R-22, R-402A, R-408A, R-404A, R-507) equipment, as well as a suitable option for new equipment.
Opteon™ XP40 offers the best overall balance of performance, cost, safety, and sustainability as a class A1 refrigerant with a GWP of 1282 and zero ozone depletion potential (ODP).
Using these retrofit guidelines, existing R-402A and R-408A direct expansion refrigeration systems can be converted to operate using Opteon™ XP40, allowing the equipment to continue to function safely and efficiently with a greatly reduced environmental impact.
Important Safety Information Like all Freon™ and Opteon™ refrigerants, Opteon™ XP40 is safe to use when handled properly.
However, any refrigerant can cause injury or even death when mishandled.
Please review the following guidelines and consult the product Safety Data Sheet (SDS), including proper personal protective equipment recommendations, before using any refrigerant.
At a minimum, appropriate hand (gloves) and eye (safety glasses) protection should be used. •
Do not work in high concentrations of refrigerant vapors.
Always maintain adequate ventilation in the work area.
Do not breathe vapors.
Do not breathe lubricant mists from leaking systems.
Ventilate the area well after any leak before attempting to repair equipment. •
Do not use handheld leak detectors to check for breathable air in enclosed working spaces.
These detectors are not designed to determine if the air is safe to breathe.
Use oxygen monitors to ensure adequate oxygen is available to sustain life. •
Do not use flames or halide torches to search for leaks.
Open flames (e.g., halide or brazing torches) in the presence of any fluorocarbon refrigerant can decompose the refrigerant, forming hazardous acidic compounds.
Halide torches are not effective as leak detectors for HFO or HFC refrigerants, as they only detect the presence of chlorine in the refrigerant.
Chlorine is not present in Opteon™ XP40, and, consequently, these detectors will not detect the presence of this refrigerant.
Use an electronic leak detector specifically designed for the refrigerants you are using.
If you detect a visible change in the size or color of a flame when using brazing torches to repair equipment, stop work immediately and leave the area.
Ventilate the work area well, and stop any refrigerant leaks before resuming work.
These flame effects may be an indication of very high refrigerant concentrations, and continuing to work without adequate ventilation may result in injury or death
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
Listed with ExportYourStore.com