R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch Replace22 KIT
R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch Replace22 KIT
R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch Replace22 KIT
R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch Replace22 KIT

R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch Replace22 KIT

Regular price $268.95 Sale

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch
Replace22 KIT


















FREE SHIPPING!! 

We have the best price on eBay ON THIS #1 r22 REPLACEMENT!.

(1) 5 Lb. Tank of Refrigerant R-438a

(1) 36" Charging Hose


(1) Envirosafe PSXL4 System Sealer Injector


 


*This will screw onto the suction service port (Larger Line).


Connect the charging hose coming from the refrigerant can to the injector.


Added the refrigerant that will push the product in as need to fully charge the system.


Envirosafe PSXL4 Injector


One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.  


ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.


Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.



  • Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 

  • ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.

  • Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. 

  • If there is still Proseal XL4 in the system it will reseal the schrader.

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • DO NOT use in ammonia systems

  • One-time use

  • Concentrated

  • No need to pump-down R410 or other units

  • No injection-hose or caulk-gun needed

  • Concentrated formula means less material in the system


 

R22, R-22 Replacement, R438a

 R438a/MO99

R22 #1 Replacement , R438a

Refrigerant 

5 Lb. Tank

New and factory Sealed 

Description

R438a/MO99 is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system.


Refrigerant R438a is ideal because it  cools as well as R22 while costing significantly less. 


Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant. 


In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant. 


Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant. 


Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99. 


This allows existing equipment to continue operating safely and effectively for the remainder of its useful life.


Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration


refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems. 


Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required.


Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added. 


Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications. 


Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems. 


Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge



















You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

FREE SHIPPING!! We have the best price on eBay ON THIS #1 r22 REPLACEMENT!. (1) 5 Lb. Tank of Refrigerant R-438a (1) 36" Charging Hose (1) Envirosafe PSXL4 System Sealer Injector *This will screw onto the suction service port (Larger Line). Connect the charging hose coming from the refrigerant can to the injector. Added the refrigerant that will push the product in as need to fully charge the system. Envirosafe PSXL4 Injector One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. ---Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. ---ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. ---If there is still Proseal XL4 in the system it will reseal the schrader. ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils ---DO NOT use in ammonia systems ---One-time use ---Concentrated ---No need to pump-down R410 or other units ---No injection-hose or caulk-gun needed ---Concentrated formula means less material in the system R22, R-22 Replacement, R438a R438a/MO99 R22 #1 Replacement , R438a Refrigerant 5 Lb. Tank New and factory Sealed Description R438a/MO99 is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system. Refrigerant R438a is ideal because it cools as well as R22 while costing significantly less. Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant. In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant. Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant. Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99. This allows existing equipment to continue operating safely and effectively for the remainder of its useful life. Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems. Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required. Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added. Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications. Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems. Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R438a, EPA & ASHRAE APPROVED, Same As MO99, 5 Lb. Quick Switch
Replace22 KIT


















FREE SHIPPING!! 

We have the best price on eBay ON THIS #1 r22 REPLACEMENT!.

(1) 5 Lb. Tank of Refrigerant R-438a

(1) 36" Charging Hose


(1) Envirosafe PSXL4 System Sealer Injector


 


*This will screw onto the suction service port (Larger Line).


Connect the charging hose coming from the refrigerant can to the injector.


Added the refrigerant that will push the product in as need to fully charge the system.


Envirosafe PSXL4 Injector


One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.  


ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.


Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.



  • Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 

  • ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.

  • Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. 

  • If there is still Proseal XL4 in the system it will reseal the schrader.

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • DO NOT use in ammonia systems

  • One-time use

  • Concentrated

  • No need to pump-down R410 or other units

  • No injection-hose or caulk-gun needed

  • Concentrated formula means less material in the system


 

R22, R-22 Replacement, R438a

 R438a/MO99

R22 #1 Replacement , R438a

Refrigerant 

5 Lb. Tank

New and factory Sealed 

Description

R438a/MO99 is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system.


Refrigerant R438a is ideal because it  cools as well as R22 while costing significantly less. 


Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant. 


In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant. 


Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant. 


Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99. 


This allows existing equipment to continue operating safely and effectively for the remainder of its useful life.


Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration


refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems. 


Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required.


Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added. 


Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications. 


Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems. 


Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge



















You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.


Listed with ExportYourStore.com