R422d Refrigerant, 11 lbs, Sealed, R22 Replacement, Refrigeration Applications

R422d Refrigerant, 11 lbs, Sealed, R22 Replacement, Refrigeration Applications

Regular price $339.95 Sale

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R422d Refrigerant, 11 lbs, Sealed, R22 Replacement, Refrigeration
Applications

















This listing is for a new "FACTORY SEALED" 11 Lb. Tank Of Refrigerant R-422d.


 


Refrigerant R422d, 11 lbs, Sealed, R22 Replacement, Refrigeration Applications 


 


 *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)


 


The best replacement for R-22 Refrigerant in commercial refrigeration applications is R422d.


Used in Europe for over a decade, R422d refrigerant is the only PROVEN R-22 replacement and is being manufactured and is available in the United States. 

R422d refrigerant is a true drop-in replacement and no system changes are required. 

Don`t worry about oil changes and rest assured R422d refrigerant is good for cap tubes and TXV. 

It operates at lower discharge pressure and temperature than R22, which is great for the compressor.

Advantages

R422d refrigerant is the approved R22 replacement drop- in refrigerant by Carrier Commercial.

R422d refrigerant operates in R22 systems without requiring an oil change to expensive synthetic oil.

R422d refrigerant has the benefit of lower energy consumption.
R422d refrigerant operates at near capacity of R22.

R422d refrigerant operates at lower discharge pressure & temperatures thereby reducing compressor workload.

R422d refrigerant can be mixed with R22 without any system performance problems (if a service tech, inadvertently mixes the two refrigerants).

R422d refrigerant has been operating in all types of systems with all types of compressors worldwide for the past 10 years. 

No other R22 alternative refrigerant can make this claim.

R422d refrigerant is produced in Texas, the UK and China.

Type and Description

R422d refrigerant is a non flammable blend of HFC 125, HFC 134a, n-butane, isobutane and isopentane which is zero ODP. 

It is compatible with both traditional mineral and synthetic lubricants so that a retrofit is not required. 

The hydrocarbons in RS-44 improve the oil return to the compressor to extend the life of the compressor.

R422d refrigerant is a direct replacement for R22, providing an easy and at the same time a long term solution. 

Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided. 

R422d refrigerant has significantly lower discharge temperatures and pressures than R22 which removes the problem of oil decomposition and improves the coefficient of performance and saves wear on the compressor.
Applications

R422d refrigerant is suitable for use as a replacement for R- 22 in existing residential, commercial and industrial air conditioning and refrigeration systems, and appliances.

Service Work

Because it is a blend, it is recommended that R422d refrigerant be charged into systems as a liquid as opposed to the gaseous phase. 

Since there is no need to change the existing lubricant, RS-44 is straightforward to use, as the following procedure outlines.

Lubricants
R422d refrigerant is compatible with both mineral and alkybenzene oils found in R22 systems, and also with the polyolester lubricants. 

Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.

Materials Compatibility
R422d refrigerant is compatible with all materials commonly used in refrigeration systems previously charged with R22. In general, materials which are compatible with R22 can be used with RS-44. 

lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.

Environmental Data

None of the components of R422d refrigerant contains chlorine so that it has no ability to deplete the ozone layer.


As with all hydrofluorocarbons (HFCs), R422d refrigerant does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI). Tests have shown that R422d refrigerant has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.


 


(1) 11 lb. R-422d Factory Sealed Can.


 


The hose connection is standard, 1/4" male flare.


                                                     

The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.


 



















You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

This listing is for a new "FACTORY SEALED" 11 Lb. Tank Of Refrigerant R-422d. Refrigerant R422d, 11 lbs, Sealed, R22 Replacement, Refrigeration Applications *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) The best replacement for R-22 Refrigerant in commercial refrigeration applications is R422d. Used in Europe for over a decade, R422d refrigerant is the only PROVEN R-22 replacement and is being manufactured and is available in the United States. R422d refrigerant is a true drop-in replacement and no system changes are required. Don`t worry about oil changes and rest assured R422d refrigerant is good for cap tubes and TXV. It operates at lower discharge pressure and temperature than R22, which is great for the compressor. Advantages R422d refrigerant is the approved R22 replacement drop- in refrigerant by Carrier Commercial. R422d refrigerant operates in R22 systems without requiring an oil change to expensive synthetic oil. R422d refrigerant has the benefit of lower energy consumption. R422d refrigerant operates at near capacity of R22. R422d refrigerant operates at lower discharge pressure & temperatures thereby reducing compressor workload. R422d refrigerant can be mixed with R22 without any system performance problems (if a service tech, inadvertently mixes the two refrigerants). R422d refrigerant has been operating in all types of systems with all types of compressors worldwide for the past 10 years. No other R22 alternative refrigerant can make this claim. R422d refrigerant is produced in Texas, the UK and China. Type and Description R422d refrigerant is a non flammable blend of HFC 125, HFC 134a, n-butane, isobutane and isopentane which is zero ODP. It is compatible with both traditional mineral and synthetic lubricants so that a retrofit is not required. The hydrocarbons in RS-44 improve the oil return to the compressor to extend the life of the compressor. R422d refrigerant is a direct replacement for R22, providing an easy and at the same time a long term solution. Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided. R422d refrigerant has significantly lower discharge temperatures and pressures than R22 which removes the problem of oil decomposition and improves the coefficient of performance and saves wear on the compressor. Applications R422d refrigerant is suitable for use as a replacement for R- 22 in existing residential, commercial and industrial air conditioning and refrigeration systems, and appliances. Service Work Because it is a blend, it is recommended that R422d refrigerant be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, RS-44 is straightforward to use, as the following procedure outlines. Lubricants R422d refrigerant is compatible with both mineral and alkybenzene oils found in R22 systems, and also with the polyolester lubricants. Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed. Materials Compatibility R422d refrigerant is compatible with all materials commonly used in refrigeration systems previously charged with R22. In general, materials which are compatible with R22 can be used with RS-44. lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility. Environmental Data None of the components of R422d refrigerant contains chlorine so that it has no ability to deplete the ozone layer. As with all hydrofluorocarbons (HFCs), R422d refrigerant does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI). Tests have shown that R422d refrigerant has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode. (1) 11 lb. R-422d Factory Sealed Can. The hose connection is standard, 1/4" male flare. The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R422d Refrigerant, 11 lbs, Sealed, R22 Replacement, Refrigeration
Applications

















This listing is for a new "FACTORY SEALED" 11 Lb. Tank Of Refrigerant R-422d.


 


Refrigerant R422d, 11 lbs, Sealed, R22 Replacement, Refrigeration Applications 


 


 *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)


 


The best replacement for R-22 Refrigerant in commercial refrigeration applications is R422d.


Used in Europe for over a decade, R422d refrigerant is the only PROVEN R-22 replacement and is being manufactured and is available in the United States. 

R422d refrigerant is a true drop-in replacement and no system changes are required. 

Don`t worry about oil changes and rest assured R422d refrigerant is good for cap tubes and TXV. 

It operates at lower discharge pressure and temperature than R22, which is great for the compressor.

Advantages

R422d refrigerant is the approved R22 replacement drop- in refrigerant by Carrier Commercial.

R422d refrigerant operates in R22 systems without requiring an oil change to expensive synthetic oil.

R422d refrigerant has the benefit of lower energy consumption.
R422d refrigerant operates at near capacity of R22.

R422d refrigerant operates at lower discharge pressure & temperatures thereby reducing compressor workload.

R422d refrigerant can be mixed with R22 without any system performance problems (if a service tech, inadvertently mixes the two refrigerants).

R422d refrigerant has been operating in all types of systems with all types of compressors worldwide for the past 10 years. 

No other R22 alternative refrigerant can make this claim.

R422d refrigerant is produced in Texas, the UK and China.

Type and Description

R422d refrigerant is a non flammable blend of HFC 125, HFC 134a, n-butane, isobutane and isopentane which is zero ODP. 

It is compatible with both traditional mineral and synthetic lubricants so that a retrofit is not required. 

The hydrocarbons in RS-44 improve the oil return to the compressor to extend the life of the compressor.

R422d refrigerant is a direct replacement for R22, providing an easy and at the same time a long term solution. 

Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided. 

R422d refrigerant has significantly lower discharge temperatures and pressures than R22 which removes the problem of oil decomposition and improves the coefficient of performance and saves wear on the compressor.
Applications

R422d refrigerant is suitable for use as a replacement for R- 22 in existing residential, commercial and industrial air conditioning and refrigeration systems, and appliances.

Service Work

Because it is a blend, it is recommended that R422d refrigerant be charged into systems as a liquid as opposed to the gaseous phase. 

Since there is no need to change the existing lubricant, RS-44 is straightforward to use, as the following procedure outlines.

Lubricants
R422d refrigerant is compatible with both mineral and alkybenzene oils found in R22 systems, and also with the polyolester lubricants. 

Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.

Materials Compatibility
R422d refrigerant is compatible with all materials commonly used in refrigeration systems previously charged with R22. In general, materials which are compatible with R22 can be used with RS-44. 

lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.

Environmental Data

None of the components of R422d refrigerant contains chlorine so that it has no ability to deplete the ozone layer.


As with all hydrofluorocarbons (HFCs), R422d refrigerant does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI). Tests have shown that R422d refrigerant has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.


 


(1) 11 lb. R-422d Factory Sealed Can.


 


The hose connection is standard, 1/4" male flare.


                                                     

The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.


 



















You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.


Listed with ExportYourStore.com