R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Kit
R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Kit
R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Kit
R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Kit

R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Kit

Regular price $288.95 Sale

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C &
Refrigeration Kit





















(1) 5 Lb. Can Of R-417A


(1) 36" Charging Hose


 


(1) Envirosafe ProSealXL4 Injector


 


*This will screw onto the suction service port (Larger Line).


Connect the charging hose coming from the refrigerant can to the injector.


Added the refrigerant that will push the product in as need to fully charge the system.


Envirosafe PSXL4 Injector


One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.  


ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.


Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.



  • Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 

  • ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.

  • Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. 

  • If there is still Proseal XL4 in the system it will reseal the schrader.

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • DO NOT use in ammonia systems

  • One-time use

  • Concentrated

  • No need to pump-down R410 or other units

  • No injection-hose or caulk-gun needed

  • Concentrated formula means less material in the system


  


Same Day UPS Shipping if ordered by 11:00am CST.


 


R417A, MO59,  HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Systems


 


**WARNING**


*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.


*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.


*CONTENT UNDER PRESSURE.


*VAPOR HARMFUL SKIN AND EYE IRRITANT.


DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY.


ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.


DO NOT MIX WITH ANY OTHER REFRIGERANT.


FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!


DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.


HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.


DO NOT PUNCTURE OR INCINERATE THIS CAN.


DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.


KEEP OUT OF REACH OF CHILDREN.
























You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

(1) 5 Lb. Can Of R-417A (1) 36" Charging Hose (1) Envirosafe ProSealXL4 Injector *This will screw onto the suction service port (Larger Line). Connect the charging hose coming from the refrigerant can to the injector. Added the refrigerant that will push the product in as need to fully charge the system. Envirosafe PSXL4 Injector One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. ---Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. ---ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. ---If there is still Proseal XL4 in the system it will reseal the schrader. ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils ---DO NOT use in ammonia systems ---One-time use ---Concentrated ---No need to pump-down R410 or other units ---No injection-hose or caulk-gun needed ---Concentrated formula means less material in the system Same Day UPS Shipping if ordered by 11:00am CST. R417A, MO59, HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Systems **WARNING** *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS. *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS. *CONTENT UNDER PRESSURE. *VAPOR HARMFUL SKIN AND EYE IRRITANT. DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY. ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT. DO NOT MIX WITH ANY OTHER REFRIGERANT. FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!! DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F. HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST. DO NOT PUNCTURE OR INCINERATE THIS CAN. DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F. KEEP OUT OF REACH OF CHILDREN.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R417A, MO59, 5 Lb HFC Blend Retrofit Refrigerant for R22 A/C &
Refrigeration Kit





















(1) 5 Lb. Can Of R-417A


(1) 36" Charging Hose


 


(1) Envirosafe ProSealXL4 Injector


 


*This will screw onto the suction service port (Larger Line).


Connect the charging hose coming from the refrigerant can to the injector.


Added the refrigerant that will push the product in as need to fully charge the system.


Envirosafe PSXL4 Injector


One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.  


ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.


Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.



  • Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 

  • ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.

  • Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. 

  • If there is still Proseal XL4 in the system it will reseal the schrader.

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • DO NOT use in ammonia systems

  • One-time use

  • Concentrated

  • No need to pump-down R410 or other units

  • No injection-hose or caulk-gun needed

  • Concentrated formula means less material in the system


  


Same Day UPS Shipping if ordered by 11:00am CST.


 


R417A, MO59,  HFC Blend Retrofit Refrigerant for R22 A/C & Refrigeration Systems


 


**WARNING**


*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.


*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.


*CONTENT UNDER PRESSURE.


*VAPOR HARMFUL SKIN AND EYE IRRITANT.


DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY.


ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.


DO NOT MIX WITH ANY OTHER REFRIGERANT.


FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!


DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.


HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.


DO NOT PUNCTURE OR INCINERATE THIS CAN.


DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.


KEEP OUT OF REACH OF CHILDREN.
























You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.


Listed with ExportYourStore.com