R401A, Refrigerant Coolers, MP39, Freezers, 28 oz Recharge Kit Gauge, Tool Kit

Refrigerant MP-39

MP-39, MP39, Refrigerant Coolers, Freezers, 28 oz Recharge Kit Gauge & Hose NEW!

Each can contains 28 oz. Of Refrigerant

Disposable can

The can has a 1/4" Male flare "top-mount" hose connection with a internal valve core. It will also come with a brass cap with interna; seal to keep the connection clean and prevent any accidental leaks.

You do not need any can taper for this can.

It contains 28 oz. (almost 2 lbs) of Refrigerant MP-39. 16 oz. equals 1 lb.

(1) Top Mount, screw-on, gauge taper.

(1) 36" Charging hose, 1/4" female flare with valve core depressor on one end.

(2) extra gaskets/o-rings for the taper.

(1) Pocket Thermometer

(2) 1/4 Brass Caps with internal gasket

(2) valve cores

(1) valve core tool

(1) Pocket screwdriver set

Freon&; MP39 is an HCFC retrofit refrigerant for R-12 in stationary positive displacement air-conditioning and refrigeration systems such as walk-in coolers, beverage dispensers, vending machines, and supermarket systems.  

Field experience has shown that no oil change is needed in many unitary and close-coupled systems.

Applications

Medium- and low-temperature positive displacement equipment in supermarket systems and walk-in coolers.

Benefits

• Works with existing mineral oil (MO) in many unitary and close-coupled systems.
• Alkylbenzene (AB) oil is recommended for optimum oil return.
• One compressor oil change to AB will typically remove 50% to 80% of the existing MO, which satisfies the recommendations and requirements of most compressor manufacturers; 10% to 25% less refrigerant is needed. 

An EPA certificate is required to purchase MP39

of an e-mail sent to us.