R22NEW, R-22PRO-KIT, ProSeal, ProDry XL4 & UV Dye, Refrigerant, A/C, 20 oz
R22NEW, R-22PRO-KIT, ProSeal, ProDry XL4 & UV Dye, Refrigerant, A/C, 20 oz

R22NEW, R-22PRO-KIT, ProSeal, ProDry XL4 & UV Dye, Refrigerant, A/C, 20 oz

Regular price $290.53 Sale

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R22, R-22, ProSeal, ProDry XL4 & UV Dye, Refrigerant, A/C,
Refrigeration, 20 oz








R22, R-22, Refrigerant, ProSeal & ProDry XL4 & UV Dye Leak Detector, 20 oz, Can   


R22 Refrigerant


 


*ProSeal XL4



  • Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints.

  • Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications.

  • Will normally repair a leak in systems up from 1.5 to 5 ton.



 

*ProDry XL4 Moisture Remover 



  •  Enviro-Safe’s ProDry XL4 

  • Use Prodry XL4  to eliminate and prevent acid formation in your air conditioner. 

  • The moisture presence of choriflourine corocarbon based refrigerants can form extremely corrosive hydrochloric and hydrofloric acids that chemically corrodes systems and reduces the output and efficiency of air conditioning systems. 

  • ProDry XL4 neutralizes acids in systems by taking the moisture and converting it into a synthetic oil which enhances lubrication in the air conditioning system.

    • Can be used as a system-protector against system failure.

    • Protects against leaks formed by corrosion.

    • Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system.

    • Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past.  

    • If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4.

    • When put into an A/C system that has moisture or air, ProDry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system.

    • No need to pump-down R410 or other units

    • No injection-hose or caulk-gun needed





 

*UV DYE LEAK LOCATION

 




  • Fully compatible with mineral, ester, and pag oils

  • Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • No need to pump-down the system.

  • No injection-hose or caulk-gun needed

  • Our can  requires a special "Top-Mount" Screw-On Can taper 


  • The CGA600 can taper is included in this listing.



 


DO NOT MIX WITH ANY OTHER REFRIGERANT R22.


 


Refrigerant Can Notes:


 



INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND


 REFRIGERANT HANDLING.


**WARNING**


*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.


*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.


*CONTENT UNDER PRESSURE.


*VAPOR HARMFUL SKIN AND EYE IRRITANT.


DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO


 BURST AND RESULT IN SERIOUS INJURY.


ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.


USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R22.


DO NOT MIX WITH ANY OTHER REFRIGERANT.


FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!


DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.


HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.


DO NOT PUNCTURE OR INCINERATE THIS CAN.


DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.


Do not refill can.


KEEP OUT OF REACH OF CHILDREN.










You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

R22, R-22, Refrigerant, ProSeal & ProDry XL4 & UV Dye Leak Detector, 20 oz, Can R22 Refrigerant *ProSeal XL4 ---Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints. ---Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications. ---Will normally repair a leak in systems up from 1.5 to 5 ton. *ProDry XL4 Moisture Remover --- Enviro-Safe’s ProDry XL4 ---Use Prodry XL4 to eliminate and prevent acid formation in your air conditioner. ---The moisture presence of choriflourine corocarbon based refrigerants can form extremely corrosive hydrochloric and hydrofloric acids that chemically corrodes systems and reduces the output and efficiency of air conditioning systems. ---ProDry XL4 neutralizes acids in systems by taking the moisture and converting it into a synthetic oil which enhances lubrication in the air conditioning system. ------Can be used as a system-protector against system failure. ------Protects against leaks formed by corrosion. ------Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system. ------Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past. ------If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4. ------When put into an A/C system that has moisture or air, ProDry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system. ------No need to pump-down R410 or other units ------No injection-hose or caulk-gun needed *UV DYE LEAK LOCATION ---Fully compatible with mineral, ester, and pag oils ---Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils ---No need to pump-down the system. ---No injection-hose or caulk-gun needed ---Our can requires a special "Top-Mount" Screw-On Can taper --- ---The CGA600 can taper is included in this listing. DO NOT MIX WITH ANY OTHER REFRIGERANT R22. Refrigerant Can Notes: INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND REFRIGERANT HANDLING. **WARNING** *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS. *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS. *CONTENT UNDER PRESSURE. *VAPOR HARMFUL SKIN AND EYE IRRITANT. DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY. ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT. USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R22. DO NOT MIX WITH ANY OTHER REFRIGERANT. FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!! DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F. HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST. DO NOT PUNCTURE OR INCINERATE THIS CAN. DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F. Do not refill can. KEEP OUT OF REACH OF CHILDREN.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R22, R-22, ProSeal, ProDry XL4 & UV Dye, Refrigerant, A/C,
Refrigeration, 20 oz








R22, R-22, Refrigerant, ProSeal & ProDry XL4 & UV Dye Leak Detector, 20 oz, Can   


R22 Refrigerant


 


*ProSeal XL4



  • Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints.

  • Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications.

  • Will normally repair a leak in systems up from 1.5 to 5 ton.



 

*ProDry XL4 Moisture Remover 



  •  Enviro-Safe’s ProDry XL4 

  • Use Prodry XL4  to eliminate and prevent acid formation in your air conditioner. 

  • The moisture presence of choriflourine corocarbon based refrigerants can form extremely corrosive hydrochloric and hydrofloric acids that chemically corrodes systems and reduces the output and efficiency of air conditioning systems. 

  • ProDry XL4 neutralizes acids in systems by taking the moisture and converting it into a synthetic oil which enhances lubrication in the air conditioning system.

    • Can be used as a system-protector against system failure.

    • Protects against leaks formed by corrosion.

    • Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system.

    • Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past.  

    • If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4.

    • When put into an A/C system that has moisture or air, ProDry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system.

    • No need to pump-down R410 or other units

    • No injection-hose or caulk-gun needed





 

*UV DYE LEAK LOCATION

 




  • Fully compatible with mineral, ester, and pag oils

  • Uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • No need to pump-down the system.

  • No injection-hose or caulk-gun needed

  • Our can  requires a special "Top-Mount" Screw-On Can taper 


  • The CGA600 can taper is included in this listing.



 


DO NOT MIX WITH ANY OTHER REFRIGERANT R22.


 


Refrigerant Can Notes:


 



INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND


 REFRIGERANT HANDLING.


**WARNING**


*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.


*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.


*CONTENT UNDER PRESSURE.


*VAPOR HARMFUL SKIN AND EYE IRRITANT.


DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO


 BURST AND RESULT IN SERIOUS INJURY.


ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.


USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R22.


DO NOT MIX WITH ANY OTHER REFRIGERANT.


FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!


DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.


HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.


DO NOT PUNCTURE OR INCINERATE THIS CAN.


DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.


Do not refill can.


KEEP OUT OF REACH OF CHILDREN.










You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.


Listed with ExportYourStore.com