R22 Replacement, 10 Lb., R453a Refrigerant, Newest R22 Drop-in Replacement
Regular price
$349.95
Sale
Replacement
(1) 10 Lb. of R453a Refrigerant in a DOT39 disposable container.
R453a is the newest R22 drop-in replacement refrigerant in the U.S. market.
R453a has been sold worldwide for the past 5 years.
It is the closest replacement to R22 that operates with very similar discharge pressure, cooling capacity and flow rate as R22.
It requires no oil or system component changes and has the lowest GWP of any HFC R22 replacement in the market at 1664 TAR.
R453a is a PROVEN R-22 replacement now being manufactured in the United States.
R453a Advantages:
- R453a has the same flow rate as R22.
- R453a operates at a similar discharge pressure as R22 and lower pressure than R407A & C, R422B & D, R417a and R427A.
- R453a has the benefit of lower energy consumption;
- R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications down to -20⁰F evap. temp
- R453a is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.
- If a service technician inadvertently mixes R453a with R22 there will be no harm to the system components or system efficiency.
- We know this to be true because in Europe, where there are no regulations against mixing refrigerants, our European sister company has tracked these developments.
- In the USA, the EPA does not permit or condone the intentional mixing of refrigerants.
- R453a is good for cap tube and TXV systems.
- It has been operating in all types of systems with all types of compressors worldwide since 2013.
- R453a requires no oil or system component changes.
Type and Description
R453a is a non flammable HFC blend.
It is compatible with both traditional mineral and synthetic lubricants so that a retrofit to a different refrigerant oil is not required.
The small amount of hydrocarbons in R453a improve the oil return to the compressor to extend the life of the compressor.
R453a is a direct replacement for R22, providing an easy and long term solution.
Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided.
R453a has similar discharge pressures as R22 and lower discharge temperature than R22; which make R453a a seamless drop-in replacement.
R453a is suitable for use as a replacement for R-22 in existing residential, commercial and industrial air conditioning and refrigeration systems.
Service Work
Because it is a blend, it is recommended that R453a be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, R453a is straightforward to use, as the published conversion procedure outlines.
Lubricants
R453a is compatible with mineral, alkybenzene and polyolester (POE and PAO) lubricants.
Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.
Materials Compatibility
R453a is compatible with all materials commonly used in refrigeration systems previously charged with R22.
In general, materials which are compatible with R22 can be used with R453a.
lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.
Environmental Data
None of the components of R453a contains chlorine so that it has no ability to deplete the ozone layer.
As with all hydrofluorocarbons (HFCs), R453ab does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI).
Tests have shown that R453a has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.
R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications
CANADA CUSTOMERS:
We will include a copy of the eBay invoice with this item as UPS in Canada requires this.
You will have to pay your custom charges and all other charges that apply in Canada.
We have no way of knowing what those charges are or will be.
You can contact your local UPS store with questions on your costs for custom charges.
If you purchase this item from Canada and refuse delivery from UPS due to your local custom charges, you will be charged a return shipping cost as well as the actual original shipping cost.
FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE MANUALS.
USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R22.
Refrigerant Can Notes:
INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND
REFRIGERANT HANDLING.
**WARNING**
*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
*CONTENT UNDER PRESSURE.
*VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R22.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
PLEASE CONTACT YOUR LOCAL UPS CENTER AND ASK THEM WHAT YOUR
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
Replacement
(1) 10 Lb. of R453a Refrigerant in a DOT39 disposable container.
R453a is the newest R22 drop-in replacement refrigerant in the U.S. market.
R453a has been sold worldwide for the past 5 years.
It is the closest replacement to R22 that operates with very similar discharge pressure, cooling capacity and flow rate as R22.
It requires no oil or system component changes and has the lowest GWP of any HFC R22 replacement in the market at 1664 TAR.
R453a is a PROVEN R-22 replacement now being manufactured in the United States.
R453a Advantages:
- R453a has the same flow rate as R22.
- R453a operates at a similar discharge pressure as R22 and lower pressure than R407A & C, R422B & D, R417a and R427A.
- R453a has the benefit of lower energy consumption;
- R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications down to -20⁰F evap. temp
- R453a is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.
- If a service technician inadvertently mixes R453a with R22 there will be no harm to the system components or system efficiency.
- We know this to be true because in Europe, where there are no regulations against mixing refrigerants, our European sister company has tracked these developments.
- In the USA, the EPA does not permit or condone the intentional mixing of refrigerants.
- R453a is good for cap tube and TXV systems.
- It has been operating in all types of systems with all types of compressors worldwide since 2013.
- R453a requires no oil or system component changes.
Type and Description
R453a is a non flammable HFC blend.
It is compatible with both traditional mineral and synthetic lubricants so that a retrofit to a different refrigerant oil is not required.
The small amount of hydrocarbons in R453a improve the oil return to the compressor to extend the life of the compressor.
R453a is a direct replacement for R22, providing an easy and long term solution.
Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided.
R453a has similar discharge pressures as R22 and lower discharge temperature than R22; which make R453a a seamless drop-in replacement.
R453a is suitable for use as a replacement for R-22 in existing residential, commercial and industrial air conditioning and refrigeration systems.
Service Work
Because it is a blend, it is recommended that R453a be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, R453a is straightforward to use, as the published conversion procedure outlines.
Lubricants
R453a is compatible with mineral, alkybenzene and polyolester (POE and PAO) lubricants.
Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.
Materials Compatibility
R453a is compatible with all materials commonly used in refrigeration systems previously charged with R22.
In general, materials which are compatible with R22 can be used with R453a.
lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.
Environmental Data
None of the components of R453a contains chlorine so that it has no ability to deplete the ozone layer.
As with all hydrofluorocarbons (HFCs), R453ab does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI).
Tests have shown that R453a has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.
R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications
CANADA CUSTOMERS:
We will include a copy of the eBay invoice with this item as UPS in Canada requires this.
You will have to pay your custom charges and all other charges that apply in Canada.
We have no way of knowing what those charges are or will be.
You can contact your local UPS store with questions on your costs for custom charges.
If you purchase this item from Canada and refuse delivery from UPS due to your local custom charges, you will be charged a return shipping cost as well as the actual original shipping cost.
FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE MANUALS.
USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R22.
Refrigerant Can Notes:
INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND
REFRIGERANT HANDLING.
**WARNING**
*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
*CONTENT UNDER PRESSURE.
*VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R22.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
PLEASE CONTACT YOUR LOCAL UPS CENTER AND ASK THEM WHAT YOUR
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
(1) 10 Lb. of R453a Refrigerant in a DOT39 disposable container.
R453a is the newest R22 drop-in replacement refrigerant in the U.S. market.
R453a has been sold worldwide for the past 5 years.
It is the closest replacement to R22 that operates with very similar discharge pressure, cooling capacity and flow rate as R22.
It requires no oil or system component changes and has the lowest GWP of any HFC R22 replacement in the market at 1664 TAR.
R453a is a PROVEN R-22 replacement now being manufactured in the United States.
R453a Advantages:
- R453a has the same flow rate as R22.
- R453a operates at a similar discharge pressure as R22 and lower pressure than R407A & C, R422B & D, R417a and R427A.
- R453a has the benefit of lower energy consumption;
- R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications down to -20⁰F evap. temp
- R453a is the lowest GWP HFC R22 replacement on the market at 1664 TAR and is Zero Ozone Depleting.
- If a service technician inadvertently mixes R453a with R22 there will be no harm to the system components or system efficiency.
- We know this to be true because in Europe, where there are no regulations against mixing refrigerants, our European sister company has tracked these developments.
- In the USA, the EPA does not permit or condone the intentional mixing of refrigerants.
- R453a is good for cap tube and TXV systems.
- It has been operating in all types of systems with all types of compressors worldwide since 2013.
- R453a requires no oil or system component changes.
Type and Description
R453a is a non flammable HFC blend.
It is compatible with both traditional mineral and synthetic lubricants so that a retrofit to a different refrigerant oil is not required.
The small amount of hydrocarbons in R453a improve the oil return to the compressor to extend the life of the compressor.
R453a is a direct replacement for R22, providing an easy and long term solution.
Because there is no need to use expensive and hygroscopic synthetic lubricants (POE), the risk of moisture ingress into a refrigeration system is completely avoided.
R453a has similar discharge pressures as R22 and lower discharge temperature than R22; which make R453a a seamless drop-in replacement.
R453a is suitable for use as a replacement for R-22 in existing residential, commercial and industrial air conditioning and refrigeration systems.
Service Work
Because it is a blend, it is recommended that R453a be charged into systems as a liquid as opposed to the gaseous phase. Since there is no need to change the existing lubricant, R453a is straightforward to use, as the published conversion procedure outlines.
Lubricants
R453a is compatible with mineral, alkybenzene and polyolester (POE and PAO) lubricants.
Therefore, there is no need to change the lubricant although compressor manufacturers' recommendations regarding lubricity should be followed.
Materials Compatibility
R453a is compatible with all materials commonly used in refrigeration systems previously charged with R22.
In general, materials which are compatible with R22 can be used with R453a.
lt is recommended to check equipment manufacturer's retrofit literature and obtain recommendations from equipment manufacturers with regard to materials' compatibility.
Environmental Data
None of the components of R453a contains chlorine so that it has no ability to deplete the ozone layer.
As with all hydrofluorocarbons (HFCs), R453ab does have a direct global warming potential (GWP), but this is counterbalanced by its lower Total Equivalent Warming Impact (TEWI).
Tests have shown that R453a has a higher Coefficient of Performance (COP) than R22 in a range of applications including commercial refrigeration systems and heat pumps, both in the heating and cooling mode.
R453a operates at near cooling capacity of R22 in both A/C and Refrigeration applications
CANADA CUSTOMERS:
We will include a copy of the eBay invoice with this item as UPS in Canada requires this.
You will have to pay your custom charges and all other charges that apply in Canada.
We have no way of knowing what those charges are or will be.
You can contact your local UPS store with questions on your costs for custom charges.
If you purchase this item from Canada and refuse delivery from UPS due to your local custom charges, you will be charged a return shipping cost as well as the actual original shipping cost.
FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE MANUALS.
USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R22.
Refrigerant Can Notes:
INTENDED FOR USE BY QUALIFIED, EPA CERTIFIED TECHNICIANS,WHO ARE TRAINED IN THE USE OF REFRIGERANT AND
REFRIGERANT HANDLING.
**WARNING**
*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
*CONTENT UNDER PRESSURE.
*VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R22.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
PLEASE CONTACT YOUR LOCAL UPS CENTER AND ASK THEM WHAT YOUR
Listed with ExportYourStore.com