R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 & PRO DRY XL4

R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 & PRO DRY XL4

Regular price $319.95 Sale

R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 & PRO DRY XL4

R22 Charging Kit 

For any refrigeration or air conditioning system containing refrigerant R-22!

Refrigerant R22 is used in ,

Air-Conditioners

Coolers and Freezers

Some appliances

R22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.

This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.

Includes;

One (1) LARGE 28 oz. Can of R22 Refrigerant.

Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and 12" charging hose!

Check and Charge it Gauge

An EPA certificate is required to purchase R22

 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.

(1) Can of Super Strength Pro-Seal XL4,  "Leak Stop"

Super Strength ProSeal XL4  is designed for repairing leaks in condensers, evaporators, copper line, and solder joints. 

This product is an epoxy that reacts to water and air. 

When coming in contact with the atmosphere, it forms a seal over the leak. 

If your system stays charged for one day when running, this product will fix most leaks that you may encounter.

If there is air and water in your system, pull a deep vac on the system and boil moisture out of the system. 

Another option is to use Pro Dry XL4 (included) to turn moisture into synthetic oil. 

This will prevent Super Strength Pro Seal XL4 from reacting inside your system.

 

In most cases, if a system has not leaked below 15 psi, there is typically not air or moisture in the system. The system has greater pressure than what the atmospheric pressure is and cannot leak unless the system is below 15 degrees.

Save on costly repairs, use Super Strength ProSeal XL4. 

Made for large systems (5 ton A/C's)

Note:  A/C unit must be in operational condition and running before Pro Seal can be installed (if system has leaked down to zero, you must also use Pro Dry XL4.

Directions:

1.  Install can to can tap (raise piercing valve so it does NOT pierce can)

2.  connect other end to A/C unit (low pressure port -- big line)

3.  Turn on A/C unit

4.  Pierce can.  Open valve slowly with can upside down.

5.  When can is empty, change can and continue charging with refrigerant until you reach manufacturer's pressure specs.

(1) Can of Super Strength Pro-Dry XL4

*Ideal to use in recharging an R22 Home A/C system.  

  • Removes moisture to protect from system failure due to corrosion since moisture robs a system of cooling capacity
  • Prevents Corrosion
  • Treats 1 1/2 - 5 ton units
  • Use with Pro-Seal  to protect sealants from reacting in system.

 Should be used on any home A/C system that has leaked below 15 psi (running or not running) OR  If the system has ever leaked in the past below 15 psi.  If you do not wish to use Pro Dry, the system must be vacuumed prior to installing Pro Seal.

*When put into an A/C system that has moisture or air, Pro Dry  mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system

Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.

R-22

Also for R22 Heat Pump systems.

This kit includes a Can taper with "in-line gauge" , a 36" charging hose.

The hose connection is 1/4" Female swivel flare nut with the valve core depressor!

****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.

USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.

DO NOT MIX WITH ANY OTHER REFRIGERANT.

Generally, in order to sell refrigerants, the law requires sellers to make sure that the buyer is certified by the Environmental Protection Agency (EPA).

Before purchasing these items, be sure you fall into one of the categories  or guidelines listed below.

·         The buyer has to be EPA-certified.

·         The buyer has to show proof of certification before paying and before the item is shipped.

*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.

 

 

An EPA certificate is required to purchase R22
 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.