R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP KIT inject

R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP KIT inject

Regular price $299.99 Sale

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP
KIT inject


R22 Charging Kit

For any refrigeration or air conditioning system containing refrigerant R-22!


Refrigerant R22 is used in ,


Air-Conditioners


Coolers and Freezers


Some appliances


R22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.


This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.


Includes;

(1) Check and charge it gauge

(1) 36" charging hose


One (1) LARGE 28 oz. Can of R22 Refrigerant.


Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and 12" charging hose!


Check and Charge it Gauge


An EPA certificate is required to purchase R22

 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.

(1) ProSeal XL4 Inject 

For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5
Envirosafe 
Direct Inject (goes on the end of your hose and the system connection)
Refrigerant Leak Sealant
Super Concentrate
Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's
Concentrated
Reinforced clear hose
Easy product injecting viewing (you know its going in!!)
Easiest Sealant to Install
Permanent Seal
Works with All Refrigerants (excluding ammonia) 
Professional Use Only
1/4" male Flare fitting inlet
1/4' Female flare swivel with valve core depressor outlet or system connection.
System pump down not required
Good for R410a systems
One time use!
Directions on back of box.
One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units.
Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.

Eliminate the tedious, and time consuming process of "pumping down the unit".

Simply Connect and Inject.

Enviro-Safe's ProSeal XL4 Inject is:

  • Concentrated
  • Compatible with all refrigerant, except ammonia
  • Compatible with all oils
  • No need to pump down R410, or other units
  • Large equipment, bulky tools, injection hoses are a thing of the past

For Use In:

  • heat pumps
  • split systems & mini split units
  • packaged units
  • micro-channel coils

Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.


R-22


Also for R22 Heat Pump systems.


This kit includes a Can taper with "in-line gauge" , a 36" charging hose.


The hose connection is 1/4" Female swivel flare nut with the valve core depressor!


****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.


USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.


DO NOT MIX WITH ANY OTHER REFRIGERANT.


Generally, in order to sell refrigerants, the law requires sellers to make sure that the buyer is certified by the Environmental Protection Agency (EPA).



·         The buyer has to be EPA-certified.


·         The buyer has to show proof of certification before paying and before the item is shipped.


*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.

 


 





An EPA certificate is required to purchase R22
 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.



You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

R22 Charging Kit For any refrigeration or air conditioning system containing refrigerant R-22! Refrigerant R22 is used in , Air-Conditioners Coolers and Freezers Some appliances R22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose. This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans. Includes; (1) Check and charge it gauge (1) 36" charging hose One (1) LARGE 28 oz. Can of R22 Refrigerant. Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and 12" charging hose! Check and Charge it Gauge An EPA certificate is required to purchase R22 Refrigerant "OR" a statement saying you are purchasing this for "Resale Only". The "Resale Only" statement can be in the form of an e-mail. (1) ProSeal XL4 Inject For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5 Envirosafe Direct Inject (goes on the end of your hose and the system connection) Refrigerant Leak Sealant Super Concentrate Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's Concentrated Reinforced clear hose Easy product injecting viewing (you know its going in!!) Easiest Sealant to Install Permanent Seal Works with All Refrigerants (excluding ammonia) Professional Use Only 1/4" male Flare fitting inlet 1/4' Female flare swivel with valve core depressor outlet or system connection. System pump down not required Good for R410a systems One time use! Directions on back of box. One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units. Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedious, and time consuming process of "pumping down the unit". Simply Connect and Inject. Enviro-Safe's ProSeal XL4 Inject is: ---Concentrated ---Compatible with all refrigerant, except ammonia ---Compatible with all oils ---No need to pump down R410, or other units ---Large equipment, bulky tools, injection hoses are a thing of the past For Use In: ---heat pumps ---split systems & mini split units ---packaged units ---micro-channel coils Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT. R-22 Also for R22 Heat Pump systems. This kit includes a Can taper with "in-line gauge" , a 36" charging hose. The hose connection is 1/4" Female swivel flare nut with the valve core depressor! ****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS. USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22. DO NOT MIX WITH ANY OTHER REFRIGERANT. Generally, in order to sell refrigerants, the law requires sellers to make sure that [the buyer is certified by the Environmental Protection Agency (EPA)] (https://cgi3.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=epa-spd) . · The buyer has to be EPA-certified. · The buyer has to show proof of certification before paying and before the item is shipped. *You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped. An EPA certificate is required to purchase R22 Refrigerant "OR" a statement saying you are purchasing this for "Resale Only". The "Resale Only" statement can be in the form of an e-mail.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP
KIT inject


R22 Charging Kit

For any refrigeration or air conditioning system containing refrigerant R-22!


Refrigerant R22 is used in ,


Air-Conditioners


Coolers and Freezers


Some appliances


R22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.


This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.


Includes;

(1) Check and charge it gauge

(1) 36" charging hose


One (1) LARGE 28 oz. Can of R22 Refrigerant.


Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and 12" charging hose!


Check and Charge it Gauge


An EPA certificate is required to purchase R22

 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.

(1) ProSeal XL4 Inject 

For Systems up to 1.5 to 5 tons in sizePart# 2100A1-5
Envirosafe 
Direct Inject (goes on the end of your hose and the system connection)
Refrigerant Leak Sealant
Super Concentrate
Treats Systems up to 5 Tons or 18,000 to 60,000 BTU's
Concentrated
Reinforced clear hose
Easy product injecting viewing (you know its going in!!)
Easiest Sealant to Install
Permanent Seal
Works with All Refrigerants (excluding ammonia) 
Professional Use Only
1/4" male Flare fitting inlet
1/4' Female flare swivel with valve core depressor outlet or system connection.
System pump down not required
Good for R410a systems
One time use!
Directions on back of box.
One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. 1.5 ton system and 1.5- 5 ton systems. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units.
Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
*DO NOT use in ammonia systems.

Eliminate the tedious, and time consuming process of "pumping down the unit".

Simply Connect and Inject.

Enviro-Safe's ProSeal XL4 Inject is:

  • Concentrated
  • Compatible with all refrigerant, except ammonia
  • Compatible with all oils
  • No need to pump down R410, or other units
  • Large equipment, bulky tools, injection hoses are a thing of the past

For Use In:

  • heat pumps
  • split systems & mini split units
  • packaged units
  • micro-channel coils

Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.


R-22


Also for R22 Heat Pump systems.


This kit includes a Can taper with "in-line gauge" , a 36" charging hose.


The hose connection is 1/4" Female swivel flare nut with the valve core depressor!


****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.


USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.


DO NOT MIX WITH ANY OTHER REFRIGERANT.


Generally, in order to sell refrigerants, the law requires sellers to make sure that the buyer is certified by the Environmental Protection Agency (EPA).



·         The buyer has to be EPA-certified.


·         The buyer has to show proof of certification before paying and before the item is shipped.


*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.

 


 





An EPA certificate is required to purchase R22
 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.



You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.


Listed with ExportYourStore.com