R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP KIT

R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP KIT

Regular price $294.95 Sale

R22, A/C, Refrigeration, RECHARGE KIT GAUGE, PRO SEAL XL4 LEAK STOP KIT

R22 Charging Kit

For any refrigeration or air conditioning system containing refrigerant R-22!

Refrigerant R22 is used in ,

Air-Conditioners

Coolers and Freezers

Some appliances

One (1) LARGE 28 oz. Can of R22 Refrigerant.

R22 Recharge Kit with "IN-LINE" TEST GAUGE and Charging hose.

This "TOP-MOUNT" can taper with gauge and Hose will also fit the R12 cans.

Includes;

(1) Check and charge it gauge

(1) 36" charging hose

One (1) LARGE 28 oz. Can of R22 Refrigerant.

Top Mount Can taper with "IN-LINE" "CHECK AND CHARGE-IT" gauge and 12" charging hose!

Check and Charge it Gauge

An EPA certificate is required to purchase R22

 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.

(1) Can of Super Strength Pro-Seal XL4,  "Leak Stop"

Super Strength ProSeal XL4  is designed for repairing leaks in condensers, evaporators, copper line, and solder joints. 

This product is an epoxy that reacts to water and air. 

When coming in contact with the atmosphere, it forms a seal over the leak. 

If your system stays charged for one day when running, this product will fix most leaks that you may encounter.

Save on costly repairs, use Super Strength ProSeal XL4. 

Made for systems up to.....5 ton.

Note:  A/C unit must be in operational condition and running before Pro Seal can be installed.

Directions:

1.  Install can to can tap (raise piercing valve so it does NOT pierce can)

2.  connect other end to A/C unit (low pressure port -- big line)

3.  Turn on A/C unit

4.  Pierce can.  Open valve slowly with can upside down.

5.  When can is empty, change can and continue charging with refrigerant until you reach manufacturer's pressure specs.

Can be used on any Air Conditioning, Refrigeration or Heat Pump system that use's R-22 REFRIGERANT.

R-22

Also for R22 Heat Pump systems.

This kit includes a Can taper with "in-line gauge" , a 36" charging hose.

The hose connection is 1/4" Female swivel flare nut with the valve core depressor!

****FOR USE BY QUALIFIED TECHNICIANS WITH APPROPRIATE INFORMATION MANUALS.

USE ONLY IN AIR CONDITIONING OR REFRIGERATION SYSTEMS DESIGNED FOR R22.

DO NOT MIX WITH ANY OTHER REFRIGERANT.

Generally, in order to sell refrigerants, the law requires sellers to make sure that the buyer is certified by the Environmental Protection Agency (EPA).

Before purchasing these items, be sure you fall into one of the categories  or guidelines listed below.

·         The buyer has to be EPA-certified.

·         The buyer has to show proof of certification before paying and before the item is shipped.

*You must be EPA certified to purchase this product and show proof of certification before the item will be shipped.*You have to be certified by the Environmental Protection Agency (EPA), Section 608 or Section 609. *You have to show proof of certification before paying and before the items can be shipped.

 

 


An EPA certificate is required to purchase R22
 Refrigerant  "OR" a statement saying you are
 purchasing this for "Resale Only". 
The "Resale Only" statement can be in the form
of an e-mail.