R--22 Drop-In Replacement, R422B, 5 lb Can & ProSeal XL4 & Dye Charge, #1 Choice
R--22 Drop-In Replacement, R422B, 5 lb Can & ProSeal XL4 & Dye Charge, #1 Choice
R--22 Drop-In Replacement, R422B, 5 lb Can & ProSeal XL4 & Dye Charge, #1 Choice
R--22 Drop-In Replacement, R422B, 5 lb Can & ProSeal XL4 & Dye Charge, #1 Choice

R--22 Drop-In Replacement, R422B, 5 lb Can & ProSeal XL4 & Dye Charge, #1 Choice

Regular price $260.95 Sale

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R22 Drop-In Replacement, R422B, 5 lb. Can & ProSeal Xl4 & Dye
Charge, #1 Choice



 An acceptable and safe alternative/replacement for R22.


 


Our listing is for a 5 Lb. Tank Of Refrigerant R422b with Oil Charge.


ProSeal XL4 (System Sealer) Stop-Leak


Dye Charge, UV Dye to help locate any leaks.


ProSeal XL4 System Sealer is one of our most requested product and with Dye is a concentrated refrigerant leak sealant.  


ProSeal XL4 Inject is compatible with all refrigerants except ammonia. 


ProSeal XL4 performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.


  • **Finds and seals leaks in ac systems

  • Unlike most other products on the market, ProSeal XL4 with Dye Inject travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.

  • Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • Even though ProSeal XL4 with Dye can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. 

  • If there is still ProSeal XL4 with Dye in the system it will reseal the schrader.

  • ProSeal XL4 with Dye uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • No need to pump-down the system.

  • No injection-hose or caulk-gun needed

  • Concentrated formula mixed with the refrigerant means less material in the system.

*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)


 


If you inadvertently mix R422B with 


  •  R22 there will be no harm to the system components or 

  • system efficiency.  

  • Actually there will be an improvement in oil return and operating pressures.

  •   

  • We know this to be true because in Europe, where  

  • there are  

  • no regulations against mixing refrigerants, our European 

  •  

  • sister company has tracked these developments.  

  •  

  • ***In the USA, the EPA does not permit or condone the 

  • intentional mixing of refrigerants.

 


This listing is for a 5 Lb. Tank Of Refrigerant R-422b with Oil Charge.


 


  • Refrigerant R422b is the NUMBER 1 "DROP-IN" replacement for R22.

  •  

It works even better than R22 and is much more reasonable in cost.


There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has.


It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler.


Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement "DROP-IN" for R22.


If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a "DROP-IN" replacement.


All that is required that you install the new label on the equipment.


This listing includes a EPA approved R422b bael/ sticker.


Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system.


 


*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)


 


 


The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene. 


Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop.  


 


(1) 5 lb. R422b. Factory Sealed Can with Oil Charge.


 


The hose connection is standard, 1/4" male flare.


 


The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.


 


** Canada Customers;


Shipping to Canada is with UPS Ground only.


 


You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller.


 


Please contact your local UPS Center to find out what those charges will be.


They are located in;


Edmonton, AB.


Concord, ON.


Delta, BC.


*They will ask you what the item is (refrigerant) and the "cost" not including shipping.


Thank you!





You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.

An acceptable and safe alternative/replacement for R22. Our listing is for a 5 Lb. Tank Of Refrigerant R422b with Oil Charge. ProSeal XL4 (System Sealer) Stop-Leak Dye Charge, UV Dye to help locate any leaks. ProSeal XL4 System Sealer is one of our most requested product and with Dye is a concentrated refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. ProSeal XL4 performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---**Finds and seals leaks in ac systems ---Unlike most other products on the market, ProSeal XL4 with Dye Inject travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though ProSeal XL4 with Dye can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. ---If there is still ProSeal XL4 with Dye in the system it will reseal the schrader. ---ProSeal XL4 with Dye uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils ---No need to pump-down the system. ---No injection-hose or caulk-gun needed ---Concentrated formula mixed with the refrigerant means less material in the system. *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) If you inadvertently mix R422B with --- R22 there will be no harm to the system components or ---system efficiency. ---Actually there will be an improvement in oil return and operating pressures. --- ---We know this to be true because in Europe, where ---there are ---no regulations against mixing refrigerants, our European --- ---sister company has tracked these developments. --- ---***In the USA, the EPA does not permit or condone the ---intentional mixing of refrigerants. This listing is for a 5 Lb. Tank Of Refrigerant R-422b with Oil Charge. ---Refrigerant R422b is the NUMBER 1 "DROP-IN" replacement for R22. --- It works even better than R22 and is much more reasonable in cost. There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has. It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler. Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement "DROP-IN" for R22. If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a "DROP-IN" replacement. All that is required that you install the new label on the equipment. This listing includes a EPA approved R422b bael/ sticker. Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system. *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene. Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop. (1) 5 lb. R422b. Factory Sealed Can with Oil Charge. The hose connection is standard, 1/4" male flare. The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray. ** Canada Customers; Shipping to Canada is with UPS Ground only. You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller. Please contact your local UPS Center to find out what those charges will be. They are located in; Edmonton, AB. Concord, ON. Delta, BC. *They will ask you what the item is (refrigerant) and the "cost" not including shipping. Thank you!
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze


R22 Drop-In Replacement, R422B, 5 lb. Can & ProSeal Xl4 & Dye
Charge, #1 Choice



 An acceptable and safe alternative/replacement for R22.


 


Our listing is for a 5 Lb. Tank Of Refrigerant R422b with Oil Charge.


ProSeal XL4 (System Sealer) Stop-Leak


Dye Charge, UV Dye to help locate any leaks.


ProSeal XL4 System Sealer is one of our most requested product and with Dye is a concentrated refrigerant leak sealant.  


ProSeal XL4 Inject is compatible with all refrigerants except ammonia. 


ProSeal XL4 performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.


  • **Finds and seals leaks in ac systems

  • Unlike most other products on the market, ProSeal XL4 with Dye Inject travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.

  • Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints

  • Even though ProSeal XL4 with Dye can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. 

  • If there is still ProSeal XL4 with Dye in the system it will reseal the schrader.

  • ProSeal XL4 with Dye uses a precisely selected, florescent-yellow dye that is highly visible and is the same dye used by auto makers in car A/Cs

  • This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.

  • Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils

  • No need to pump-down the system.

  • No injection-hose or caulk-gun needed

  • Concentrated formula mixed with the refrigerant means less material in the system.

*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)


 


If you inadvertently mix R422B with 


  •  R22 there will be no harm to the system components or 

  • system efficiency.  

  • Actually there will be an improvement in oil return and operating pressures.

  •   

  • We know this to be true because in Europe, where  

  • there are  

  • no regulations against mixing refrigerants, our European 

  •  

  • sister company has tracked these developments.  

  •  

  • ***In the USA, the EPA does not permit or condone the 

  • intentional mixing of refrigerants.

 


This listing is for a 5 Lb. Tank Of Refrigerant R-422b with Oil Charge.


 


  • Refrigerant R422b is the NUMBER 1 "DROP-IN" replacement for R22.

  •  

It works even better than R22 and is much more reasonable in cost.


There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has.


It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler.


Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement "DROP-IN" for R22.


If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a "DROP-IN" replacement.


All that is required that you install the new label on the equipment.


This listing includes a EPA approved R422b bael/ sticker.


Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system.


 


*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)


 


 


The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene. 


Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop.  


 


(1) 5 lb. R422b. Factory Sealed Can with Oil Charge.


 


The hose connection is standard, 1/4" male flare.


 


The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.


 


** Canada Customers;


Shipping to Canada is with UPS Ground only.


 


You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller.


 


Please contact your local UPS Center to find out what those charges will be.


They are located in;


Edmonton, AB.


Concord, ON.


Delta, BC.


*They will ask you what the item is (refrigerant) and the "cost" not including shipping.


Thank you!





You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.

You must show proof of certification before paying and before the item is shipped. 

*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.

Thank you. 

SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.

The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.


Listed with ExportYourStore.com